Видео

Awesome flight.

do you sell plan?

I love it!

It seems the Aerovee and the Revmaster are one in the same engine.

Excited to see the Highwing prototype. It looks like an awesome choice for those of us who prefer the wing on top.

❤

Switching to guns!

I just put a deposit down on an AeroVee-powered Sonex. I have some apprehension about the AeroVee, but feel much better about it after watching this presentation!

enjoyed thank you

Great flight test

- I am truly impressed by the effort and work you are providing on this plane project, but I have a slight criticism. It is a plane with straight wings. It is true that it gives the plane stability at slow speeds, but it is not made for maneuvers. - The simplest example is at 5:30 You can notice that the wing was affected in a different way than the fuselage, and if it was affected with a greater force, it could have been damaged and would have caused an efficiency problem. I did not have the opportunity from all angles to monitor the behavior of the wings during aerobatics, but I advise you to change the shape of the wings to ensure that no problems occur in the future, so wings Such as Delta Wing Shape or Swept Wings It will give the plane stability at high speeds, as well as strength and endurance during maneuvers and aerobatics. - I liked the idea of V-shape tail I believe that because of it, the plane was able to make all these movements, but if you decide to follow my advice, it is better to keep it in its shape with the addition of horizontal stabilizer flat with the surface of the delta shape wings or just put a twin tail dont forget to make all the horizontal stabilizer work as an elevator . - If you could give me some authority to study all the information you have collected on this project, I can direct you to the best choices for making an aircraft that reaches tremendous speeds and is also stable, whether at low or high speeds, while ensuring its efficiency in maneuvers and aerobatics, without forgetting the safety of the pilot and passengers. - All of this information that I presented came from my experience in the field of aviation engineering, especially Soviet aircraft such as the Su-30MKA and Sukhoi Su-27, also training ones like Yak-130 and L-39 . . But I do not have any certificates in the field of aviation. Only as an amateur I used to approach the places of these aircraft to study their shape and how they work with such solidity and fluidity, while asking questions to those in charge of the military and civilian facilities. I also had real-life experiences by flying alongside the pilot to see and observe how each piece worked. From planes. - in the past two years, I have been working on a project to manufacture a small aircraft, meaning enough for one person, but with the ability to reach a speed goal of 800 km per hour and a smooth ability with ease of control, which means stability. Then I can work on Range and Economics. . The problem is that I do not have the tools with which I can achieve my goals, such as a CNC milling machine, or even a place to set up my experiments in. Therefore, I gave up on my dream, but my interest is still based on it. You have truly inspired me, and I said, “If you are unable to reach your goals due to lack of conditions, just help Those who want to reach it and have the conditions available to do so.” - Thank you, with all due respect. I wish you every success in the future.

❤

❤

Thank you for another fantastic presentation!

Best video ever.

WOW!! What a ride. Enjoyed your video very much.

The tail wheel puts a lot of stress on the rudder that can tear the rivets apart causing catastrophic failure in flight. ruclips.net/video/D_Q8iVHhK_s/видео.html&pp=ygUNc29uZXggZmFpbHVyZQ%3D%3D

Please give the cost of your planes. I live in Niceville, FL. BUT have a BS from Lawrence,Appleton Wisconsin in Physics in 1961.

Amazing and motivating!!!!

Too bad it can't carry enough fuel to make it more practical. Pretty neat little plane.

Looks really good! I like this more over the low wing sonex. I hope we can see it start with kits soon as I'd like this to be my first kit.

Ive often thought of some kind of powered glider with an external cargo bay at the back, allowing access to the most remote regions. I'm sure these guys could do it, a high efficiency light transport

So has it been found out what was the cause of the crash?

Great webinar would love a B model update to the 620# Sonex clean no paint AeroVee build.

This video could use some more viewing. Great video thanks!

Great presentation. Time goes fast. Live your dream!

Very nice presentation. As for me, I'm waiting patiently for the high-wing to make it's debut, because that's going to be my next project. Thanks!

is it possible to use a 30 amp alternator? or maybe even 40? specifically speaking with the aerovee engine

Where is the Sonerai?

It's amazing that you can get a thing that flies faster than a bugatti for 80.000$

Yes High wing aerobatic.!!!!... or least stressed to a few Gs... utility etc. is good enough! for 99% of us.. Nice!

Priceless: "It's time to put your money where your bucket list is." Marketing gold.

Look that little jet is amazing, but if I had my pick I think I'd take the jet-glider. Up in my buddies old duster he got tired of hearing me yell "What?!?", and cut the engine off, and turned around to talk to me like I hadn't just begin to have a damn stroke. Once he explained that the plane had fairly good glide characteristics and we were safe, rook a few deep breaths, prayed to anyone who might listen, and then took in the environment. It was awesome, in that being 10,000 feet up and just how quiet it really was and how much bigger our little corner of the world looked, inspired real awe in me. So being able to do that again with something built to glide and stay up for a while and packs its own deployable james bond jet engine, yeah I'd take that

Can it be put on floats?

A high wing LSA kit with a tail dragger option. If you are not interested in a purpose-desingned STOLmachine/bushplane there is little on the market like this with the possible exception of some tube fabric and some composite offerings like the Skyranger and Skyranger Nynga. But it's an Aluminium Sonex! Can I mount a Rotax 912is or a Rotax 914?

John went from success to success for decades. Kind of unjust that only people in experimental aviation know his name, whereas at one time everyone had heard the name Bede.

That nose gear seems angry

A folding wing would be a great option.

the Sonex spirit ❤❤❤🛩🛩🛩

nice video , thanks

I hope sonex realizes the benefit of a brs system in their aircraft. It has saved my life once. I’m a very safe pilot and I won’t say much about it to keep my anonymity but there are some jackass controllers and pilots out there. Plus night flying which some of us have to do for work make it a true transport option.

200kias at a towered airport. Hes breaking the speed limit!😂

Option 3 - Yokes

God bless the folks at Sonex for these wonderful developments. I particularly feel, with their efforts, general aviation will gain more attraction in the new generation!

Che motore è quelloontato sul sonex llc?

I like how the flight instructor gives the plane a few quick parts before the guy solos. Every flight instructor knows what that means…..don’t be creative, fly just how we trained.

what brand is the helmet?

I do mostly "sidecountry" flying. In and out of short grass strips but no real off airport flying. Occasionally maybe a farmers field or something. I dont need massive tires to roll over big rocks, but rugged suspension would be a big bonus. When landing very short there is sometimes a need to put the plane down quite firm. So I was wondering what you think about modding it with cabane vee suspension? Also, for the mechanically inclined of us, would you ever consider manual flaps and trim?

One word: beautiful!

Not the world’s most forgiving stall, but not bad for what it is